Monotub kit for Growing mushrooms- Max Yield Bins

The kit described is an XL-size monotub designed for professional or commercial use in mushroom cultivation. It includes several components:

• 1 Black Base: The foundation of the tub where the substrate and spawn are placed.
• 1 Bin Liner:Liners are a bit different to the one in our video due to stock issues, its shown correctly on the photos.
• 1 Colonisation Lid: Used during the initial colonisation phase to cover the substrate.
• 1 Fruiting Lid: This lid is available in stackable or tapered variations. The Tapered Fruiting lid helps manage moisture by directing condensation forming on the top of the lid to the sides, while the stackable fruiting lid allows for stacking multiple tubs. If you are buying multiple tubs, it’s 100% recommended to get stackable tubs.
• After complete colonisation, the colonisation lid is replaced by one of these fruiting lids. When swapping the colonisation lid with one of the fruiting lids, you can add a casing layer to your fully colonised tub. If you decide to use our casing, you will need a 2 kg casing layer for the tub.
• 8 Air Filters: These are attached to the fruiting lids to facilitate air exchange while keeping contaminants out.

What do you not get with this kit?

-Painter tape/duct tape/micropore tape

–Grain bag, substrate and casing.

Dimensions

This monotub has a capacity of 10 kg, accommodating 2 kg of spawn and 6 kg of substrate and optionally 2 kg of casing. It is not recommended for beginners due to its large size and potential contamination loss. The tub’s robust construction is highlighted, making it durable but expensive to ship. The product is made in Canada and sold by Rootlab, the official reseller of Max Yield Bins.

Instruction-

1)Preparation

Insert the liner in the black base, add your substrate, and then the colonised mushroom spawn in layers, finishing with a substrate layer on top. It would be best to use 2 kg of spawn and 6 kg of substrate(1:3 ratio)

2) Colonisation:

Close the base with a flat coloniser lid and cover the holes in the black base with painter’s or duct tape on all sides. Leave for 2 weeks. Painter’s tape(masking tape) is recommended as it does not leave residue.

3)Fruiting stage:

Once the mycelium has fully colonised in the tub, apply a 2 Kg casing layer on top of the substrate (optional) and change to a fruiting lid.

Replace the painter’s tape or duct tape with micropore tape.

If you did not use a casing layer, you must maintain surface conditions of very fine, tiny water droplets with our heavy-duty atomiser spray. Mist as frequently as required so that the tiny droplets of water always stay on top of the surface; stop misting when the mushroom starts to come(pinset).

The tub facilitates the growth of any top-fruiting mushroom. The kind of substrate you need would differ. For example, to grow oysters, Reishi, or Shiitakes, you would need Hardwood sawdust and bran substrate. To grow portobello/white button/Almond agaricus mushrooms and any dung-loving mushrooms, you need our manure substrate. Some mushroom types may require Coco and vermiculite substrate.