Available on back-order
WATCH THE COMPLETE VIDEO GUIDE ON OUR ‘INSTRUCTIONAL VIDEO’ TAB
150L Automatic Autoclave—The product can be picked up from Marrickville, Sydney, or delivered on a pallet via tail lift to any residential/ business customer. The quote for shipping is on checkout. If you want to buy more than 1 unit, we may be able to offer additional discounts and a cheaper shipping option than what was quoted at the checkout. IF the product is in backorder it normally take 30-45 days to reach us, we place the order straight away when the customer orders the product. Once the order is placed, we are unable to cancel as we would have already paid for teh product to be dispatched.
This 150L Automatic Autoclave is a powerhouse designed for heavy-duty sterilisation needs. It operates on a single-phase connection and is ideal for home or facility setups. An electrician must perform a professional installation to ensure proper setup, but this can be installed at home in your garage. This is a recommended model for small mushroom farms. You can run this machine 3-5 times daily, giving you over 70 fruiting blocks daily!
Effortless Operation:
Fill the water (15 liters), set the timer, and let the machine handle the rest.
The autoclave automatically purges during sterilisation with no manual intervention.
A long beep will signal when the sterilisation cycle is complete.
Impressive Capacity:
This autoclave can comfortably fit the following:
30 liquid culture jars
30 x 1L reagent bottles
14 x 3kg substrate bags
18 x 2kg substrate bags
Approximately 40 x 1kg spawn bags
Fast Sterilisation:
Full load of substrate and grains sterilised in just 40 minutes (compared to 2.5 hours in a normal steriliser).
Liquid cultures are sterilised in just 8-10 minutes (compared to 45 minutes in a standard steriliser).
User-Friendly Design:
After installation, the operation is simple, just press the button twice.
The autoclave remembers your settings even after being turned off.
Durability and Maintenance:
Equipped with a tap for easy water drainage, simplifying the process of replacing water after several cycles.
Using demineralised water can extend the life of the heating element and prevent mineral deposits. The water will only need to be topped up every cycle or every 2 cycles and replaced once every 5-10 cycles, depending on how dirty it gets. If you use tap water, it’s best to replace it every 2 cycles.
Comes with wheels for easy mobility.
Includes a double-layer stainless steel mesh basket for efficient sterilisation.
Technical Requirements: Let your electrician know
Requires a 32-amp Australian single-phase straight plug with round pins (Does not come with the unit)- Photo towards the end of the gallery.
If extending the cable, use a 6mm, 2-core, and earth black heavy-duty cable.
Ensure your electrician installs a Combination Switched Socket Outlet (IP66, Single Phase, 250V, 80Hz) Does not come with the unit- Photo towards the end of the gallery.
12-Month Limited Parts Warranty
If a part fails due to a manufacturing defect within 12 months of purchase, we’ll replace it at no cost. This warranty covers defective components but doesn’t apply to normal wear and tear, misuse, or damage from accidents.
This product must be installed by a licensed electrician.
Specifications:
Maximum Temperature: 134°C
Maximum Pressure: 30 psi
Timer Range: Up to 99 minutes
Three Settings:
Pressure Adjustment (P0 or P1):
P0 retains air after sterilisation (set this for mycology use).
P1 releases air completely.
Temperature: Set to 121°C or 123°C (This corresponds to around 15 psi).
Time:
8-10 minutes for liquid culture and Agar media
40-45 minutes for grain and substrate.
Please note we cannot accept cancellations for this product if they were ordered on backorder.
This Products is shipped from Marrickville, Sydney.
Shipping Cost and Time—The shipping cost will be displayed on the checkout screen.
Handling Time—Packages typically takes 0-3 days to prepare for shipment. Unless otherwise stated as ‘Lead time’ on the listing as something different.
Please note that handling time may vary, especially during busy holidays or sale period.
Certain products, like Colonised agar plates or Sawdust spawn, Spray and grow kit, have longer handling times as they are made to order.
Up to 6% Off
We're always here to help. If you'd rather dig in yourself, our Learning Centre is packed with guides on inoculation, fruiting, and troubleshooting.
Join the mushroom revolution and sign up to unlock a discount on your first order.
Sign up to our SMS/WhatsApp list and we'll text you with the biggest sales and alerts.
No thanks
Welcome to the Rootlab community! You've unlocked access to:
Plus 5% off your first order — check your inbox!
